The Brophy Camper Tie Down # TDSF is a compatible fit for your 1973 Ford F-150/F-250/F-350 full size truck and will fit most campers up to 8 feet in length. I have included a link to the instructions for proper installation.
I also recommend the Brophy Camper Tie Down Hardware Package # TDHP for use with the Brophy Tie Downs. They have a capacity of 3000 lbs and I have included a link to the instructions for the proper installation of this product. view full answer...
There is one available solution for frame mounted truck camper tie-downs on your 2018 Toyota Tacoma as long as your truck doesn't have the aftermarket Mopar rear-mounted kick out steps that are mounted under the bumper.
If you don't have that rear-mounted kick out step then you can use the TorkLift Camper Tie Downs # TLT2303 (front) and # TLT3307 (rear). The inserts slide into frame-mounted brackets when being used and easily remove for a clean, unobtrusive look when you don't have your... view full answer...
The particular Brophy Camper Tie Downs you referenced, part # TDSF, are not a fit for your 2011 Sierra, but there are other options available for your truck. The particular camper tie-down that is appropriate for your Sierra will depend on its exact configuration.
I have provided a link to our main page for these products and at the top of the page you can use the drop-down menu to select the particular combination of features on your Sierra. Series, bed length and cab style all affect... view full answer...
For a 2018 Ram 3500 Crew Cab with factory hitch and 8-foot bed we do have hitch fits that are shown on the linked page. These include both 2-inch hitches like Draw-Tite # 41929 which fits with a standard factory bumper and 2-1/2-inch hitches like TorkLift # TLD1108-30. This is pre-drilled for TorkLift camper tie downs.
The fit of camper tie-downs depends on several factors including your hitch. TorkLift offers both steel and aluminum camper tie downs for the Ram 3500 Crew Cab 8-foot bed... view full answer...
For your 2000 Ford F-350 you can use the Brophy Stake Pocket Camper Tie Down Kit # TDSF that you referenced as long as it has straight fenders and single-wall construction. These will install permanently in your truck.
You may also want the matching Camper Tie Down Hardware Package # TDHP which consists of 4 each of turnbuckles, S hooks and chains.
The linked video illustrates both items.
A variety of frame-mount tie downs are also offered for your truck and these can be seen on the... view full answer...
Yes we have a wide selection of mounting options for your truck camper on your 2005 Dodge Ram Pickup. The Brophy brand has a series of clamps in powder coating, zinc plated and chrome. Such as the Brophy Clamp On Camper Tie-Downs, # HSAB. Or the Brophy Clamp On Camper Tie-Downs - Bed Mount - Zinc Plated Steel, # HSBP.
You may also want to look at the HappiJac Truck-Mounted Camper Tie-Downs, # LC182908-182928. view full answer...
Yes, you are correct. For a 2007 GMC Sierra Classic 2500HD Crew Cab with 6-1/2' bed and Class V Curt Trailer Hitch Receiver, # C15302 installed, the TorkLift Custom Frame-Mounted Camper Rear Tie-Downs, # TLR3500 will fit.
For front, use TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2205. view full answer...
Your best bet would be tie-downs from Torklift. These tie-downs are a confirmed fit for your truck.
If your truck has a 6 Foot bed and is a Crew Cab or King Cab - without board or step underneath truck bed and without a hitch, part # TLN2409 for front, and # TLN3403 for the rear.
If you have a 6 Foot bed with Crew Cab or King Cab - without board or step underneath truck bed and with an aftermarket hitch, use part # TLN2409 for the front and # TLR3500 for the rear.
The Brophy # HSSF camper... view full answer...
The Laramie trim level on your Ram 1500 does not affect the fit of TorkLift camper tie downs, but other equipment can affect what will work on your truck.
The link provided will take you to our main page for camper tie-downs for the 2014 Ram 1500. You will just need to select your particular version of the 1500 from the drop-down menu at the top of the page (Select Vehicle Style). It is necessary that your Ram 1500 Laramie be a 4WD truck and NOT have running boards that extend past the... view full answer...
Unfortunately the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF only come as a complete kit so you wouldn't be able to purchase just one. That being said, if one broke the others might not be too far behind so it definitely wouldn't hurt to replace each one just to ensure the safety of your truck and camper. view full answer...
We do have truck bed camper tie downs for the 2015 Ram 1500 that appear on the linked page, but these are all the frame-mount type and their fit is very specific to the truck's total configuration. These TorkLift tie down sets, such as # TLD2134 and # TLD3107 which fits the 5-1/2 foot bed without board or step underneath truck bed and with a factory installed hitch, are custom designed for your truck and allow for a more stable camper installation without loss of ground clearance. These... view full answer...
The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are not available in a quantity of two; they are only sold as a quantity of four. view full answer...
For a 2017 F-250 Super Duty with an 6-3/4' bed the needed tie-down for the front is, # TLF2022 or the # TLF2021 for an 8' bed. This is different than the needed front tie-down for a 2017 Ram which would use the, # TLD2127 be it a short or long bed Ram.
For the 6-3/4' or 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch you would want to use the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, # TLF3008 view full answer...
Currently there is not an option for the 2021 GMC Sierra 2500 HD available from Happijac. My recommendation is the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs, # TL44XR for the rear, will work with either the 8' bed or the 6-3/4'. Use either the # TL73QR or # TL43QR for the front depending on 8' bed or the 6-3/4'. I suggest using the guide to select apropriate options for specific vehicle, bed length, with/without board and hitch etc.
I prefer this option of mounting to the... view full answer...
TorkLift Derringer Handles for Camper Tie-Down Turnbuckles # TLS9528 are offered only in the standard black finish shown on the linked page. These fit 1/2-inch threaded rods found on most major camper turnbuckle assemblies. view full answer...
Yes, for your 2017 Ford F-350 the Torklift Tie Downs part number # TLF2021 and # TLF3008 are correct for your truck since it has an 8 foot bed, no running boards, and a factory hitch.
There is no drilling for either tie down. I attached install instructions below for you to check out exactly what it takes to install these. view full answer...
I checked with Torklift and they recommend the # TL44FR for the front tie downs for your truck and then for the rear part # TLC3221. I confirmed these fit the version of the 2020 GMC Sierra 3500 that you have which has a long bed, single rear wheel setup, running boards and factory hitch.
For turnbuckles then we have the stainless Derringer # TLS9020 from Torklift as well. view full answer...
Yes, the HappiJac Truck-Mounted Camper Tie-Downs # LC182905-182971 is confirmed to fit the 2007 Chevrolet Silverado with the new body, excluding the extended cab. Please note the attached review video. view full answer...
Go To Results